 |
[
CHARACTERS ]
Conform to international standard of IEC34-ICE, whole blocked
asynchronous motor with squirrel cage rotor.
Outer shell, shaft and bottom made of stainless steel.
Copper annoy or Nickel plated cast-iron upper and bracket.
Swedish bearing or equivalent products undertaking higher thrust
load.
Italian mechanical seals.
Pressure automatic adjusting device made of oil and water proof
reformed butyl-rubber.
Flange connector under the standard of NEMA (USA National Electrical
Manufacturing Association).
Lacquer-coated wire conformed to USA standard of NEMA MW37-C.
Chinese patent product, fake and imitation will be investigated.Patent
No.: ZL99240666.8 ZL99317606.2
* Motor head can be made of cast iron, copper 304 SS. and 316L
SS
[
PROPERTIES ]
Ratings: singlephase:
0.25kW - 2.2kW, threephase: 0.55kW - 7.5kW
Voltage:
singlephase 220/230V (-6% +10%) or 230/240V (+6% -10%) 50Hz,
Threephase 230V or 400V ±10% 50Hz
Thrust load:
1500N (0.25kW - 0.75kW) NFS4
2500N (1.1kW
- 5.5kW) NFS4
4500N (3.0kW
- 7.5kW) NFS4
Degree of protection: IP68
Insulation: Class B
Max.
Ambient temperature: 35₿br> Minimum cooling
flow along the motor: 8cm/sec.
Water pH:
6.5 - 8.0
Maximum starts per hour: 30
Maximum submerged depth: 150 meter Vertical
or horizontal mounting position Motor protected by temperature
compensated thermal relay and extra-quick trip.
Overload
trip time: less than 10 seconds (when 5 times of rating
current)
Flat water proof cable 4×2.0 mm2 with separated earth
wire
Dimension: 19.2×6.2mm2
Cable length: 1.1-1.5m (0.25 - 3.0 kW);
2.3-2.5m(4.0 - 5.5kW); 2.8-3.0m (7.5kW)
Special scaled product required by customers can be provided
|
