6" WATER COOLING SUBMERISIBLE MOTOR HOME > SUBMERSIBLE MOTOR

The MS series water cooling submersible motor is a new kind of products that manufactured by our company. It possesses the advantages of high efficiency, power saving and environmental protection.

[ CHARACTERS ]
Meet the requirements of Standard IEC34-1 with the structure of water-cooled sealed lubrication , non-polluting.
The dimension of installation flange and spline meet the requirements of NEMA standard (USA National Electrical Manufacturing Association).
The outer shells of the motor and the shafts are made of stainless steel as well as the fixings.Other parts are rustproof.
The main bearing and the thrust bearing have the character of anti wearing and undertaking higher thrust load.
With anti-sand installation and reformed butyl-rubber pressure equilibrium membrane.
* Motor head can be made of cast iron, 304 SS. and 316L SS

[ PROPERTIES ]
Power: three phase,5.5KW-37KW.
Voltage: three phase,380V/460V,50/60Hz.
Protection device class: IP68
Surrounding water temperature should be below 30₿br> The content of solid should not higher than 0.01%.
PH value of water: 6.5-8
Thrust load: 15,500N
Flat cable with individual ground wire: 3×6.0mm2 or 3×10.0mm2 anti water connecting cable
Cable length: 1.5-4.0m


[ PERFORMANCE ]
No. Motor Type KW HP Three Phase cosΦ rpm L Kg
A mm Kg
1 MS150-5.5 5.5 7.5 13.2 0.82 2850 780 46
2 MS150-7.5 7.5 10 17.2 0.84 2850 800 50
3 MS150-9.2 9.2 12.5 20.8 0.85 2850 830 54
4 MS150-11 11 15 24.6 0.85 2850 855 57
5 MS150-13 13 17.5 28 0.86 2850 885 60
6 MS150-15 15 20 32.2 0.86 2850 968 67
7 MS150-18.5 18.5 25 39.2 0.86 2850 1018 73
8 MS150-22 22 30 46 0.87 2850 1068 79
9 MS150-26 26 35 53.5 0.88 2850 1113 84
10 MS150-30 30 40 61.6 0.88 2850 1168 90
11 MS150-37 37 50 79.7 0.88 2850 1200 105
12 MS150-45 45 60 94.6 0.88 2850 1235 130