 |
[
CHARACTERS ]
Meet the requirements of Standard IEC34-1 with
the structure of water-cooled sealed lubrication, non-polluting.
The dimension of installation flange and spline meet the requirements
of NEMA standard (USA National Electrical Manufacturing Association).
The outer shells of the motor and the shafts are made of stainless
steel as well as the fixings.Other parts are rustproof.
The main bearing and the thrust bearing have the character of
anti wearing and undertaking higher thrust load.
With anti-sand installation and reformed butyl-rubber pressure
equilibrium membrane.
* Motor head can be made of cast iron, 304 SS. and 316L SS
[
PROPERTIES ]
Power: three
phase, 30KW-110KW. 
Voltage: three phase, 380V/460V, 50/60Hz.
Protection device class: IP68
Surrounding water temperature should be below 30₿br> The content
of solid should not higher than 0.01%.
PH value
of water: 6.5-8
Thrust load:
35,500N
Flat cable with individual ground wire:
3×6.0mm2 or 3×25mm2 waterproof connecting
cable
Cable length: 4-5m
[
PERFORMANCE ]
| Motor
Type |
Power |
Current |
Power Factor |
RPM |
| KW |
HP |
A |
 |
| MS200-30 |
30 |
40 |
64.5 |
0.84 |
2850 |
| MS200-37 |
37 |
50 |
79.7 |
0.84 |
2850 |
| MS200-45 |
45 |
60 |
94.6 |
0.85 |
2850 |
| MS200-55 |
55 |
75 |
115.7 |
0.85 |
2850 |
| MS200-63 |
63 |
85 |
130.2 |
0.86 |
2850 |
| MS200-75 |
75 |
100 |
155 |
0.86 |
2850 |
| MS200-90 |
90 |
120 |
185 |
0.86 |
2850 |
| MS200-110 |
110 |
150 |
226 |
0.86 |
2850 |
|
|
